Intelligent Switch Monitor

The Advanced Intelligent Dual Switch Monitor is an

addressable module for use with the AxisAX Series
Intelligent Fire Alarm Control Panel SLC Loops. Each
module incorporates two (2) independent, individually
programmable, initiating device circuits (IDC), providing
cost-effective solutions in areas requiring multiple

The IDC circuits are each capable of monitoring a
single contact device or a group of devices. Contacts
can be normally open (N.O.) or normally closed (N.C.)
ranging from heat detectors, linear heat detectors,
4-wire conventional smoke detectors, waterfl ow
switches, tamper switches, manual pull stations, switch
input points for control, or any other supervised input
requirement. Though each IDC circuit can monitor
any number of contact devices, it is not recommended
to mix alarm, supervisory, or security contacts on the
same IDC circuit. Each initiating device circuit is
separately addressed and can be wired Class A or B.
A typical application for the Dual Switch Monitor would
be the individual monitoring of water flow and tamper
switches located at a sprinkler system riser.

Unique Features:
• 4” Square or 2-Gang Electrical Box Mounting
• Flexible Programmablity
• Duarable Construction
• Cost-Effective & Trouble-Free Installation
• Integral Priority Interrupt

• Two Independent Initiating Device Circuits (IDC)
• Class A or B Wiring
• Dedicated IDC Activation Status LEDs

Listings and Approvals:
• ETL ANSI/UL 864 Listed: 3118002NYM-001B
• UL fi le: UOXX.S7003 / ML fi le: S24460
• CSFM Approved: 7300-1713:112


Voltage 17-28 VDC, w/ Communication Pulses 5-9 VDC
Operating Current
                   w/ LED's
(55000-805ADV, -806ADV, -831ADV, -830ADV)
0.6 mA
0.6 mA
5.6 mA
Line Impedance 100Ω
End-of-Line Resistor 47KΩ, 0.5 Watt (Class "B" only)
                   Mini Switch Monitor (55000-831ADV, -830ADV)
                   Switch Monitor (55000-805ADV, -806ADV)

Wire Leads (AWG, 6" Long)
Screw In-Out Terminals
                   Mini Switch Monitor (55000-831ADV, -830ADV)
                   Switch Monitor (55000-805ADV, -806ADV)

Inside Electrical Box Mount
4" Square or 2-Gang Electrical Outlet Box
Dimension (Diameter & Height)
                   Mini Switch Monitor (55000-831ADV, -830ADV)
                   Switch Monitor (55000-805ADV, -806ADV)

3"W x 2"H x 3/4"D 4 1/2"W x 4 1/2"H x 1"D
1.5 oz
3 oz
Operating Temperature 32° - 120°F (0° - 49°C)
Humidity 10-93 % (non-condensing)